49eronline.co.uk

Holt Blocks

20 mm Holt Block Ref: HA2020
The HA2020 holt block can be used for control line feeder for kicker, spinnaker take up elastic, mainsail downhaul and jib clew line.
Price: £6.49
Quantity:

20 mm Holt Cheek Block Ref: HA2026
The HA2026 20mm holt cheek block can be used for control line feeder and jib sheet front blocks.
Price: £8.99
Quantity:

20 mm Holt Triple Block Ref: HA2024
The HA2024 20mm holt triple block is used for multi purchase systems, on the 9er it is mainly used for the rig breaker.
Price: £21.95
Quantity:

20 mm Holt Triple Block And Cleat Ref: HA2027
The HA2027 20mm holt triple block is used for multi purchase systems, on the 9er it is mainly used for the rig breaker.
Price: £49.99
Quantity:

30 mm Holt Block Ref: HA2030
The HA2030 30mm Holt block is the most common block on the boat. Uses include spinnaker halyard top block, spinnaker halyard take up block, spinnaker halyard hoist and drop blocks, boom mainsheet blocks and some use it for the jib sheet instead of the 20mm HA2020 holt block.
Price: £7.68
Quantity:

30 mm Spinnaker Deck Block Ref: HA2036
The HA2036 Holt block is the very front block for spinnaker haylard pole out system which sits under the spinnaker bridge at the front of the boat.
Price: £11.49
Quantity:

30 mm Spinnaker Halyard Block Ref: HA2030LZ
The HA2030LZ Holt block is a ready assembled deck block including the spring and saddle ready to screw straight on to the deck for the spinnaker uphaul and downhaul.
Price: £11.49
Quantity:

Mast Block Ref: HA4786-6
This block sits inside the bottom of the mast and is the secret to faster and easier hoists. As standard the masts come with a cheap and simple non-bearing block in the base of the mast. Putting one of these ball bearing blocks in there helps to reduce the friction and speed up the hoists. Any help here is always welcome and worth the money.
Price: £18.99
Quantity:

30 mm Spinnaker Pole Block Ref: HA4701
HA4701 Holt block is used for the tack line in the end of the spinnaker pole
Price: £12.99
Quantity:

30 mm Spinnaker Top Block Ref: HOLT30
This old school block is limited supply. It is a stronger cheeks reducing the possibility of the spinnaker halyard desheaving and increasing the reliability and the life of the top block.
Price: £12.99
Quantity:

49Er Jib Cleat Ref: HA4766
HA4766 jib cleat system - reliability is key.
Price: £39.99
Quantity:

Deck Cleat Fairlead Ref: HA397
Used to feed the spinnaker halyard in the correct direction
Price: £8.25
Quantity:

Deck Cleat For Spinnaker Ref: HA77
The HA77 is used for the spinnaker halyard cleating system - with reversable jaws for a longer lasting cleat. Spinnaker halyard cleats should be replaced every 3-6months. As soon as they start slipping you must replace them, they don't get better.
Price: £19.99
Quantity:

Mainsheet Block Ref: HA4621
HA4621 swtichable ratchet for different wind strengths - strong and reliable ratchet block
Price: £39.99
Quantity:

Spinnaker Auto-Ratchet Ref: HA4620
HA4620 ratchet block automatically switches itself on and off depending on the load going through it. This gives you better control of spinnaker sheets in all conditions
Price: £30.99
Quantity:

49er Online | Holt Blocks

// actinic template from pinbrook.net //